The weight of a pool cue matters a lot when it comes to construction. So the question ‘how to change the weight of a pool cue’ remains confusing. A heavier cue will tend to create more CB speed for a given stroke effort.
The definition of a cue is easy. A cue stick is an essential sports equipment needed for pool games of pool. It is a stick used to play these games. A light cue is more comfortable to hold.
A heavier cue might also be more straightforward for some to keep online during the stroke, but this is very individual. More weight can also help prevent stroke deceleration. Let’s have a look.
How to Change the Weight of a Pool Cue: At a Glance
Some cues are adjustable. We can even add plastic-made washers to replace metal ones.
Let’s understand ‘how to change the weight of a pool cue’ by breaking the process into a step-by-step approach.
1.Requirement for Weight Bolts:
First and foremost, we need to have weight bolts to change the weight of a pool cue. These metal bolts help to decrease or increase the weight. For hexagonal hexagonal-shapes like hex keys or Allen wrench can be used.
2.Taking Off the Center Rod and Playing with Weights:
The center rod of the pool cue makes the weight adjustable. The cue will not balance the weight if we change the center rod. Hence, we must balance the weights by preparing the center rod precisely at the center of gravity. Through this, we can play with weights on both sides.
3.Finding the Cue’s Butt End and Screwing it Off:
Locating the butt end of the pool cue is easy. However, adjusting that portion very carefully is necessary to add or reduce weight.
Most of the weight of the cue is scattered in the butt area. The weight can be between 16 to 20 oz. But the change is typically in that portion.
When the butt end isn’t screwing off, it causes imbalances, and we aren’t able to change weight.
4.Choosing the Place Where You Want to Lay the Weight:
The answer to ‘how to change the weight of a pool cue’ mainly lies in the fact that we must choose where to lay the weight. It must be traditionally balanced at the center to manage the cue’s weight.
But if you are comfortable with a little more weight on one side, that’s your call. There are many weight options also available that you can use to bring out the equilibrium.
5.Always Test the Pool Cue After Resetting the Weight:
It is an important point to be noted. We should always validate the pool cue after resetting the weight because it will be another hectic task to redo. We should choose the weight we are most comfortable with.
Special Tip:
Apart from these steps, there is a special tip that I want to share with you. We should keep this in mind:
Making the Butt End Lighter
We should always strive to make the butt end lighter than the rest of the cue. This ensures the player’s comfort when he holds the cue for playing the game. To add weight to the butt end, we should check the comfort factor first.
Types of Cue Sticks
Cues (billiards cue, pool cue, or snooker cue)are tapered sticks, about 57–59 inches long and usually between 16 and 21 ounces toward a 19-ounce average.
There are mainly three types of cue sticks fashioned for the games. Let’s check them out quickly:
1.Rage Pool Cue: Weight Bolts, Butt End, Shaft, and Joint
Rage pool cues are the right choice for players of all ages. The players who want to go to higher levels without spending too much.
They are made with solid materials like rock maple, and they consist of a leather tip.
Rage pool cue weight bolts can be made medium-weighted. They are instrumental in changing the weight of the stick. The butt end and shaft have to be light.
2.Snooker Cue: Weight Bolts, Butt End, Shaft, and Joint
Fifty-eight inches, all in all, a snooker cue is short. They are joined, which makes them longer than they are.
This facilitates an extra-long case. In addition, some cues are joined in two places. Snooker cue tips are typically 8.5 – 10.5 mm in diameter to provide more accuracy and smoothness.
3.Weight Facts Regarding Pool Cue: Remember, Apply and Validate
We often stay confused regarding all the weight-related things when we try to change the weight of a pool cue.
Questions like how to change the weight, the weight options available, what kind of weight bolts need to be used, and what is the best weight or average weight of a pool cue still hover in our minds.
Let’s have a clear perspective on this:
Weight Difference in a Pool Cue
First and foremost, we need to know the difference between the weights for pool cues.
But all in all, we either strive for a lighter or heavier cue. Using a lighter cue (18-19 oz.) will create more “snap” in your shot; your cue ball will be in momentum. As a result, it will go into the pocket at a slower pace.
A heavier cue (20-21 oz.) will result in a more slow cue ball; the object ball will travel towards the pocket faster.
To understand what is a good weight of a pool cue, we should know how to measure it.
Read our related blog about How To Change Pool Cue Tip: A Definitive Guide.
How to Measure a Pool Cue?
A pool cue can be measured based on the shaft’s diameter. If it’s smaller than that, it can cause more miscues. It can give you less spin control but a consistent shot if more significant. The standard size should usually be around 12 or 13mm.
Weight of a Pool Cue: Good, Average, and Best:
Weights differ in pool cues according to their quality, price, and performance. The good weight of a pool cue ranges from 15-16 ounces. The average weight of a pool cue is found to be somewhere around 17-18 or 18. 5 ounces.
The best pool cue weight calculated and used worldwide is 19 ounces, that is, 0. 54 kilograms.
Pro players use pool cues. But which of the weights are mainly used by them? Let’s get an idea.
Pool Cue Used by Pros:
Professional players generally use cues that are almost 61,” and it depends on the height.
Professionals generally use pool cues between 19 and 19.5 ounces in weight.
In addition, they use high-quality cues, which are made with excellent materials by companies like McDermott pool, ozone billiards, etc.
They use two strategies to make the cue special. They are:
Employing a Bolt Lighter in Weight:
By employing a lighter weight bolt, the cue becomes easy to hold. This strategy is best for players who want to level up in their games with constancy and ease.
Ozone billiards has the broadest range of lightweight bolts that can be used in a cue.
Employing a Bolt Heavier in Weight:
By employing a heavy bolt, the cue’s weight is strategically balanced. Players can easily deck it up with more mass and make it work if a cue is not up to the mark in weight. This helps in changing the cue’s weight.
In a nutshell:
Changing the weight of a pool cue is essential. We can do that by following a step-by-step approach, employing bolts, fixing the butt bumper, and also the center of the stick.
Now we have a clear idea of ‘how to change the weight of a pool cue.
Frequently Asked Questions (FAQ)
- How Long are Youth Sleeping Bags?
Ans: Youth sleeping bags are maximum of 170cm × 65cm long
- How Do You Choose a Sleeping Bag for Kids?
Ans: Before choosing a sleeping bag for kids, we need to consider the weight and the temperature of the bag regarding the kid.
- Do Kids Need Sleeping Bags?
Ans: There is no compulsion that a kid must need a sleeping bag, but a high-quality one with a suitable temperature and air pocket might be fruitful for their sleep.
- How to Clean a Kid’s Sleeping Bag?
Ans: A kid’s sleeping bag can be washed with a mild soapy detergent that will retain its soft quality and also clean it thoroughly.